This is the ultimate 3DO RGB board.
- Works on all models except the Anvil Models (Late FZ-10 and Goldstar GDO-202)
- 240p support added to the BT9101 encoder
- 240p switching on all models
- 240p switch never misaligns when changing from 480i to 240p.
- Bootup in 240p mode
- RGB image is centre aligned.
- Super clean installation
- VGA output possible
Please choose if you would like an RGB mini din kit. As many people have existing RGB mods and will only need the main RGB board, the mini din kit is optional.
Full Kit:
- RGB Board (CSYNC Output)
- 1x Flex cable
- 8 or 9 Pin Mini DIN Connector
- 240p Switch
- Mounting PCBs
- RGB Board (CSYNC Output)
- 1x Flex cable
Mini DIN Only Kit:
- 8 or 9 Pin Mini DIN Connector
- 240p Switch
- Mounting PCBs
All RGB mainboards are the same and can work on any compatible model 3DO.
To determine which type of encoder you have you need to see the motherboard.
To view a list of compatible motherboards and the installation instructions, visit our GitHub repo: Here
The 8 Pin mini DIN kit is wired up to use this cable.
The 9 Pin mini DIN kit is wired up to use this cable (if you want to use standard Genesis/Mega Drive 2 cables, you need to remove all resistors/caps in the cable).
After Dan (Black Dog Tech) stopped producing these boards, he open sourced the design. We have continued the manufacturing of this high quality RGB solution for the 3DO. Full credit to Dan and the greatest of thanks for open sourcing it.
